Opened filament cannot be returned for change of mind. Filament is hygroscopic — drying before use is recommended. Suspected manufacturing defects are assessed via our support ticket and replaced if confirmed. See our Returns, Refunds & Warranty policy and Warranty page for full details.
Engineering PPA for demanding functional prototypes
An engineering polyphthalamide filament for users working beyond everyday PLA and PETG. Designed for stiffness, wear resistance and dimensional stability with suitable high-temperature printing equipment.
Material: IPCON PPA.
Filament diameter: 1.75 mm.
Net filament per spool: 1 kg.
Colour: select from the available manufacturer variants.
Check your printer first
Use a printer compatible with 1.75 mm filament and the temperature range below. Confirm the current manufacturer profile, nozzle requirements and your exact feed-system compatibility before printing.
Manufacturer printing guidance
Drying Settings Before Printing: 100 – 130 °C, 10 – 14 h (Blast drying oven).
Nozzle Temperature: 280 – 310°C.
Bed Temperature: 100 – 120°C.
An enclosed printer is recommended. Check the manufacturer's current processing guide for your model and application.
Drying, storage and results
Keep filament sealed with desiccant and follow the current material-specific drying instructions. Use equipment and spools rated for the required drying temperature. The settings above are starting guidance, not a guarantee: tune for your machine, geometry and environment. Work in a suitably ventilated area and review the safety data sheet.
Product photographs show manufacturer colour examples and sample prints; printed models are not included. Colours may vary with lighting and screen settings.
